astronowbot

1. Installation Package For The Product Status

Hi Fernie123, When do you get this error message? It seems to be that trayApp.msi and status.msi are both installation files of HP softwares.

If you are getting this error, when you try to install any software or updates for HP. You may follow these suggestions and check if it helps. Step 1 A) Let’s uninstall all HP softwares by using Windows Cleanup Utility Download and install the Windows Installer Cleanup utility from this link. 1.Now run the utility ('Start All programs Windows Install Cleanup'). In the list of programs that appear in Cleanup, a.

Select the Programs, b.Click ‘Remove’. C.Quit out of Cleanup. B) Or, you may go to Programs & Features select the HP softwares & uninstall it. Uninstall or change a program Step 2 Download & install the latest softwares from the manufacturer’s website. Hope the information helps. Please post back and let us know.

The M-33 package is the perfect package is for. Package M-33: Applications. Installation is easier and the station plate is less expensive. M33 Installation Package. Official Panasonic. MOTU is an engineering-driven music technology company passionately driven to create products that help you.

Regards Debleena S Microsoft Answers Support Engineer Visit our Microsoft Answers Feedback Forum and let us know what you think.

LED Indicators and Run Dark Mode Your MR33 is equipped with a multi-color LED light on the front of the unit to convey information about system functionality and performance:. Orange - AP is booting (permanent Orange suggests hardware issue). Rainbow - AP is initializing/scanning. Blinking Blue - AP is upgrading.

Installation Package For The Product Status

Green - AP in Gateway mode with no clients. Blue - AP in Gateway mode with clients. Blinking Orange - AP can't find uplink The MR33 may be operated in “Run Dark” mode for additional security and to reduce the visibility of the access point. In this mode, the LED will not be illuminated. This mode may be enabled through Meraki dashboard.

Configure Your Network in Dashboard The following is a brief overview only of the steps required to add an MR33 to your network. For detailed instructions about creating, configuring and managing Meraki wireless networks, refer to the online documentation. If this is your first time, create a new account. Find the network to which you plan to add your APs or create a new network. Add your APs to your network. You will need your Meraki order number (found on your invoice) or the serial number of each AP, which looks like Qxxx-xxxx-xxxx, and is found on the bottom of the unit.

You will also need your Enterprise license key, which you should have received via email. Go to the map / floor plan view and place each AP on the map by clicking and dragging it to the location where you plan to mount it. Check and Upgrade Firmware To ensure your MR33 performs optimally immediately following installation, it is recommended that you facilitate a firmware upgrade prior to mounting your MR33.

Attach your MR33 to power and a wired Internet connection. See the 'Power the MR33' section for details. The MR33 will turn on and the LED will glow solid orange. If the unit does not require a firmware upgrade, the LED will turn either green (no clients associated) or blue (clients associated) within thirty seconds. If the unit requires an upgrade, the LED will begin blinking orange until the upgrade is complete, at which point the LED will turn solid green or blue. You should allow at least a few minutes for the firmware upgrade to complete, depending on the speed of your internet connection. Static Assignment Static IPs are assigned using the local web server on each AP.

The following procedure describes how to set the static IP:. Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID broadcast by the AP) or over a wired connection.

If using a wired connection, connect the client machine to the MR33 either through a PoE switch or a PoE Injector. If using a PoE switch, plug an Ethernet cable into the MR33’s Ethernet jack, and the other end into a PoE switch. Then connect the client machine over Ethernet cable to the PoE switch. If using a PoE Injector, connect the MR33 to the “PoE” port of the Injector, and the client machine to the “LAN” port.

Using a web browser on the client machine, access the AP’s built-in web server by browsing to. Alternatively, browse to. Click on the “Uplink Configuration” tab.

The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password (e.g., Q2DD-551C-ZYW3). Configure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on its wired connection. If necessary, reconnect the AP to the LAN. Choose Your Mounting Location A good mounting location is important to getting the best performance out of your MR33 access point. Keep the following in mind:. The device should have unobstructed line of sight to most coverage areas.

For example, if installing in an office filled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high on a wall would be ideal. Power over Ethernet supports a maximum cable length of 300 ft (100 m). If being used in a mesh deployment, the MR33 should have line of sight to at least two other Meraki devices. A Cisco Partner can help ensure that your AP placement is ideal.

Attach the mount cradle The MR33 mount cradle can be used to install your access point in a wide range of scenarios: wall or solid ceiling, below a drop ceiling, on various electrical junction boxes. The mount cradle contains a variety of hole patterns that are customized for each installation scenario. The mounting template (included inbox with mount cradle) should be used to drill holes for wall mounts and also to identify the correct hole patterns in the mount cradle that should be used for each type of mount. The included mount cradle template shows the hole patterns that should be used for each type of mount. Drop ceiling mount using mount cradle To mount your MR33 on a drop ceiling T-rail, use the included drop ceiling mounting accessory kit.

The accessory kit can be used to mount to most 9/16”, 15/16” or 1 ½” T-rails. The kit contains:. Drop ceiling mounting clips with set screws.

6-32x4 mm screws. 6-32x7 mm screws only used for recessed rail mount (uncommon). 2 rubber spacers. Attach the T-rail clips to the T-rail by rotating them and snapping them into place as shown. The black foam pads should be compressed slightly after installation.

Using the dashed lines on the mount cradle template as a guide, set the proper spacing of the T-rail clips on the T-rail. Tighten the set screws on the T-rail clips to secure the clips using a 5/64”(2 mm) hex key. Attach the mount cradle to the T-rail clips using the mount cradle holes (marked with a “T“). Tip: Pre-assemble rubber spacers and screws to the mount cradle. The mount cradle can then be held with one hand while the other hand holds a screwdriver. If mounting your MR33 to a dropped ceiling, skip to the 'Power the MR33' section.

Attach the MR33 to the Mount Cradle (This section applies to wall and/or solid ceiling, drop ceiling or electrical junction box mount where you have already installed the mount cradle.) The MR33 attaches to the mount cradle with two tabs on the cradle that insert into the MR33, and is secured to the cradle using one screw. To attach the MR33 to the mount cradle properly, line up the top edge of the AP with the top tab of the mount cradle. Since the cradle is already mounted to the wall, guide the MR33 towards the top tab and i nsert the top tab into the MR33’s slot. T hen adjust the MR33 to guide the MR33’s bottom slot into the cradle’s bottom tab until it clicks into place. Once in place, the MR33 should be secured to the cradle by using one of the included screws in the cradle’s bottom tab. To release the MR33 from the mount cradle, first remove the security screw that secures the MR33 to the cradle’s bottom tab. While holding the MR33 with one hand, press the cradle’s bottom tab upwards, releasing the MR33 from the bottom of the cradle.

Then remove the MR33 from the cradle’s top tab. Verify Device Functionality and Test Network Coverage. Check LEDs. The Power LED should be solid green (or blue, if clients are connected). If it is flashing blue, the firmware is automatically upgrading and the LED should turn green when the upgrade is completed (normally within a few minutes).

See the ' section for more details. Note: Your MR33 must have an active route to the Internet to check and upgrade its firmware. Verify access point connectivity.

Use any 802.11 client device to connect to the MR33 and verify proper connectivity using the client’s web browser. Check network coverage. Confirm that you have good signal strength throughout your coverage area. You can use the signal strength meter on a laptop, smart phone, or other wireless device.